ACS110-7SN DataSheet
DATASHEET
ACS110-7SN Description
Normal operation continues with the capacitor charged and the input line voltage between 18 and 40 VDC. During this time, the converter will operate from the line voltage through the external diode. When the external capacitor reaches its final charge of 40 volts, the HUMMER module enters an idle state, consuming only enough power to keep the capacitor charged. Idle state power for the module is approximately 1 watt.
ACS110-7SN Features
In sequential addressing mode, the ACS110-7SN functions like a FIFO register. The timing between write-reset and read-reset operations determines the delay or length of the FIFO. Data may be read out as many times as desired after it has been written into the storage array of the memory. Minimum delay between writing and reading is 160 write cycles; maximum delay is one full field plus one block or 245 800 words.
ACS110-7SN Applicatioins
Technical/Catalog InformationACS110-7SNVendorSTMicroelectronicsCategoryDiscrete Semiconductor Products Triac Type