BC352239A-IVQ-E4 DataSheet
DATASHEET
BC352239A-IVQ-E4 Description
DESCRIPTION Positive power supply for the chip CMOS functions High side Input signal, TTL or CMOS compatible; HGO in phase Low side Input signal, TTL or CMOS compatible; LGO in phase Chip enable. When driven high, both outputs go low. Logic Reference Ground High Side Power Supply High side driver output High side voltage return pin Low side power supply. This power supply provides power for both outputs. Voltage range is from 4.5 to 25V. Low side driver output Low side return
BC352239A-IVQ-E4 Features
RST is a device reset pin. When RST is pulsed high while CS is low the BC352239A-IVQ-E4 will output 32 bits of fixed data which conforms to the standard for synchronous response to reset. CS must remain LOW and the part must not be in a write cycle for the response to reset to occur. See Figure 7. If at any time during the response to reset CS goes HIGH, the response to reset will be aborted and the part will return to the standby state. The response to reset is "mask programmable" only!
BC352239A-IVQ-E4 Applicatioins
Technical/Catalog InformationBC352239A-IVQ-E4VendorCSR PLC (VA)CategoryRF and RFID Frequency