BQ2004HSNTR DataSheet
DATASHEET
BQ2004HSNTR Description
PFKC03 series required a minimum 10% loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specification BELLCORE TR-NWT-000332. Case I: 50% Stress, Temperature at 40ºC. (Ground fixed and controlled environment) Maximum value at nominal input voltage and full load of standard type. Typical value at nominal input voltage and full load. Test by minimum Vin and constant resistor load.
BQ2004HSNTR Features
CE is active LOW. Chip enables must be active when data read from or write to the device. If chip enable is not active, the device is deselected and is in a standby power mode. The DQ pins will be in the high impedance state when the device is deselected.
BQ2004HSNTR Applicatioins
For a comprehensive information on MirrorBit prod- ucts, including migration information, data sheets, ap- plication notes, and software drivers, please see www.amd.comFlash MemoryProduct Informa- tionMirrorBitFlash InformationTechnical Docu- mentation. The following is a partial list of documents closely related to this product: