HCPL-2601-000E DataSheet
DATASHEET
HCPL-2601-000E Description
Input/Output Capacitors: The HCPL-2601-000E regulator requires a 100µF electrolytic capacitor at the input and output for proper operation in all applications. The ESR (equivalent series resistance) of both capacitors must be less than 250mΩ @100kHz. In addition, C1 and C 2 must be rated to a minimum of 300mArms ripple current.
HCPL-2601-000E Features
• UL Certified No. E209204 • 600V-30A 3-phase IGBT inverter bridge including control ICs for gate driving and protection • Divided negative dc-link terminals for inverter current sensing applications • Single-grounded power supply due to built-in HVIC • Typical switching frequency of 5kHz • Built-in thermistor for over-temperature monitoring • Inverter power rating of 2.4kW / 100~253 Vac • Isolation rating of 2500Vrms/min. • Very low leakage current due to using ceramic substrate • Adjustable current protection level by varying series resistor value with sense-IGBTs
HCPL-2601-000E Applicatioins
Technical/Catalog InformationHCPL-2601-000EVendorAvago Technologies US Inc.CategoryIsolators Mounting Type
Relate Parts
Part Number
Quantity
Manufacturer
Date Code
Description
Pricing
7779
11+
The MAX809 and MAX810 are costCeffective s
9847
11+
Eight-bit PWM current control is built in for all
7290
11+
Low, 55µA No-Load Supply Current Guaranteed
8786
11+
• Fast: Optimized for medium operating &nb
11286
11+
Figure 4 shows the waveforms of the circuit of Fi
12063
11+
ROM space is restricted to 1 kbyte for the PCF84C
6741
11+
256K x 36, 512K x 18 memory configurations Suppor
14989
11+
Fabricated in high-density CMOS with 5V-tolerant,
6348
11+
• FCT-C speed at 5.5 ns (FCT16841T Coml) &#