LU82551ER DataSheet
DATASHEET
LU82551ER Description
lated from: f = fO [1 - FTC (TO -TC)2]. Typically oscillator TO is approximately equal to the specified resonator TO. This equivalent RLC model approximates resonator performance near the reso- nant frequency and is provided for reference only. The capacitance CO is the static (nonmotional) capacitance between the two terminals measured at low frequency (10 MHz) with a capacitance meter. The measurement includes para- sitic capacitance with "NC pads unconnected. Case parasitic capacitance is approximately 0.05 pF. Transducer parallel capacitance can by calculated as: CP CO - 0.05 pF.
LU82551ER Features
The SNAP! Pulse programming algorithm uses initial pulses of 100 microseconds (µs) followed by a byte verification to determine when the addressed byte has been successfully programmed. Up to 10 (ten) 100-µs pulses per byte are provided before a failure is recognized.
LU82551ER Applicatioins
Technical/Catalog InformationLU82551ERVendorIntelCategoryIntegrated Circuits (ICs) Controller Type