HOME >> ICs & Semiconductors >> RF Semiconductors & Modules - MAX1473EUI
MAX1473EUI

MAX1473EUI

Manufacturer Part:MAX1473EUI
Part Type:RF Semiconductors & Modules
Manufacturer:Maxim
Part ID:MAX1473EUI
Date Code:11+
Quantity Available:12993
Last Updated:2024/11/26

Fast Responses,Multi-lingual Sales Staff

*Global work hours:24 hours a day,5 days a week.
*Detailed part quote in less than 24 hours.
*Free Product Substitution Service

Description

Features

Applications

MAX1473EUI Description

    Test pin 2,normal ground Test pin 3,normal ground Reset: An active high signal used to reset the DM6588. Crystal Oscillator Input Crystal Oscillator Output Controller Program Write Enable: This pin is used to enable FLASH ROM programming. Data Output Pin Of Serial Port 1 The serial data is clocked out through this pin

MAX1473EUI Features

    Note 3: The maximum power dissipation must be derated at elevated temperatures and is dictated by TJMAX, JA, and the ambient temperature, TA. The maximum allowable power dissipation is PDMAX = (TJMAX − TA) / JA or the given in Absolute Maximum Ratings, whichever is lower. For the MAX1473EUI typical application (shown in Figure 1) with VDD = 12V, RL = 4Ω stereo operation the total power dissipation is 3.65W. JA = 35˚C/W.

MAX1473EUI Applicatioins

    WRITE Write operations are initiated by taking CS LOW and clocking in a start bit followed by the write command and the address of the data register to be written. This action is followed by the host clocking eight bits of data into the register, MSB first. The output of the selected DAC will change as the last bit is clocked into the device. At this point the clock counter will reset the command register, requiring a full sequence to be initiated in order to write to the DAC again. NOTE: This write operation does not affect the contents of the nonvolatile register. Therefore, the nonvolatile register can contain the power-on default settings (e.g. volume), and the write DAC command can be used to make situational adjustments. Refer to Figure 2 for an illustration of the sequence of bus conditions for a write operation.
Request For Quotation
Your Name *:
We will not use your email for any purpose other than to communicate with you about the information regarding Baitron related activity,we will not provide your email to any third party.
Company Name *:
Country *:
Tel *:
Email *:
Part Number *:
Quantity *:
Comment :
If you're looking for other components,please enter part number,quantity in the comment box,we will find it for you,even if it didn't show in our inventory database

Relate Parts

Part Number
Quantity
Manufacturer
Date Code
Description
Pricing
7779
11+
  The MAX809 and MAX810 are costCeffective s
9847
11+
Eight-bit PWM current control is built in for all
7290
11+
Low, 55µA No-Load Supply Current Guaranteed
8786
11+
• Fast: Optimized for medium operating &nb
4072
11+
The ACE8001 product family has an 8-bit core proc
9113
11+
  Vth can be expressed as voltage between gat