HOME >> ICs & Semiconductors >> Power Management ICs - TPS63000DRCR
TPS63000DRCR

TPS63000DRCR

Manufacturer Part:TPS63000DRCR
Part Type:Power Management ICs
Manufacturer:TI
Part ID:TPS63000DRCR
Date Code:
Quantity Available:19077
Last Updated:2024/11/29

Fast Responses,Multi-lingual Sales Staff

*Global work hours:24 hours a day,5 days a week.
*Detailed part quote in less than 24 hours.
*Free Product Substitution Service

Description

Features

Applications

TPS63000DRCR Description

    1. Typical characteristics are at TA = 25oC. 2. These are absolute values with respect to device ground and all overshoots due to system or tester notice are included. 3. Fmax = 1/tRC . 4. IccSB1(Max.) is 0.5uA/1.3uA at Vcc=2.0V/3.0V and TA=70oC. 5. VIL = -1.5V for pulse width less than 30ns

TPS63000DRCR Features

    The PC87108 is a serial communications device with infra- red capability It supports 6 modes or operation and is back- ward compatible with the 16550 and 16450 The operational modes are UART Sharp-IR IrDA 1 0 SIR IrDA 1 1 MIR and FIR and Consumer Remote Control (commonly referred to as TV Remote) Two methods are provided to access the internal registers an internal 16-bit address decoder or an externally generat- ed chip select in combination with an internal 4-bit address decoder are used to generate the internal register select When the internal 16-bit address decoder is used any one of four PC COMM port legacy addresses can be selected as the base address In order to support existing legacy software using the 16550 UART the PC87108 provides a special fallback mechanism that automatically switches the device to 16550 compatibil- ity mode when the standard baud generator divisor registers are accessed The device architecture has been optimized to meet the requirements of a variety of UART and infrared based appli- cations DMA support for all operational modes has been incorporated into the architecture Routing for interrupt and DMA handshake signals is provided to meet Plug-and-Play as well as PC95 requirements The device can use either 1 or 2 DMA channels One chan- nel is required for infrared based applications since infrared communications work in half duplex fashion Two channels would normally be needed to handle high-speed full duplex UART based applications To further ease driver design and simplify the implementa- tion of infrared protocols a 12-bit timer with 1 ms resolution has also been included

TPS63000DRCR Applicatioins

    Technical/Catalog InformationTPS63000DRCRVendorTexas Instruments (VA)CategoryIntegrated Circuits (ICs) Type
Request For Quotation
Your Name *:
We will not use your email for any purpose other than to communicate with you about the information regarding Baitron related activity,we will not provide your email to any third party.
Company Name *:
Country *:
Tel *:
Email *:
Part Number *:
Quantity *:
Comment :
If you're looking for other components,please enter part number,quantity in the comment box,we will find it for you,even if it didn't show in our inventory database

Relate Parts

Part Number
Quantity
Manufacturer
Date Code
Description
Pricing
9113
11+
  Vth can be expressed as voltage between gat
7426
11+
  The AV34063 is a monolithic control circui
4276
11+
CURRENT LIMIT PROTECTION   The LX8819 includ
19726
Hynix HYMD232646A(L)8-M/K/H/L series incorporates
17690
NOTES: 1. WE is high for read Cycle. 2. Device i
15021
The CY7C133 and CY7C143 are high-speed CMOS 2K by
7551
ADC reference voltage that sets the maximum input
17081
From this point of view, this architecture looks