HOME >> ICs & Semiconductors >> Logic ICs - SN65HVD3082EP
SN65HVD3082EP

SN65HVD3082EP

Manufacturer Part:SN65HVD3082EP
Part Type:Logic ICs
Manufacturer:TI
Part ID:SN65HVD3082EP
Date Code:
Quantity Available:12076
Last Updated:2024/11/26

Fast Responses,Multi-lingual Sales Staff

*Global work hours:24 hours a day,5 days a week.
*Detailed part quote in less than 24 hours.
*Free Product Substitution Service

Description

Features

Applications

SN65HVD3082EP Description

    used for the high-side switch. The high-side driver voltage is supplied by PVCC. The voltage is maintained by a floating bootstrap capacitor, which is continually recharged by the switching action of the output. During shutdown UGATE is held low.

SN65HVD3082EP Features

    The SN65HVD3082EP contains five voltage comparators; four are for monitoring +5V, -5V, +12V, and -12V, and the fifth monitors any desired voltage. The SN65HVD3082EP is identical, except it monitors 15V supplies instead of 12V. The resistors required to monitor these voltages and provide comparator hysteresis are included on- chip. All comparators have open-drain outputs. These devices consume 250µA max supply current over tem- perature.

SN65HVD3082EP Applicatioins

    Technical/Catalog InformationSN65HVD3082EPVendorTexas InstrumentsCategoryIntegrated Circuits (ICs) Number of Drivers/Receivers
Request For Quotation
Your Name *:
We will not use your email for any purpose other than to communicate with you about the information regarding Baitron related activity,we will not provide your email to any third party.
Company Name *:
Country *:
Tel *:
Email *:
Part Number *:
Quantity *:
Comment :
If you're looking for other components,please enter part number,quantity in the comment box,we will find it for you,even if it didn't show in our inventory database

Relate Parts

Part Number
Quantity
Manufacturer
Date Code
Description
Pricing
9427
08+
S3901/S3904 series do not require any DC voltage
15092
11+
The SAB 80C515/80C535 is a stand-alone, high-perfo
3415
11+
Clock output traces should use series termination
5167
The Set Default command resets all conditions to t
12862
8-Bit Resolution 20 MHz Sampling Rate DNL = +1/2
18240
Operating voltage: 2.4V~3.6V Directly drives an e
10770
When executing a jump instruction, conditional ski
14200
Note 10: VIN is compared to the programmed output