HOME >> ICs & Semiconductors >> Logic ICs - SN74LVC2G17DCKR
SN74LVC2G17DCKR

SN74LVC2G17DCKR

Manufacturer Part:SN74LVC2G17DCKR
Part Type:Logic ICs
Manufacturer:TI
Part ID:SN74LVC2G17DCKR
Date Code:
Quantity Available:16727
Last Updated:2024/11/26

Fast Responses,Multi-lingual Sales Staff

*Global work hours:24 hours a day,5 days a week.
*Detailed part quote in less than 24 hours.
*Free Product Substitution Service

Description

Features

Applications

SN74LVC2G17DCKR Description

    A power ready/undervoltage lockout function outputs the status of the VCC-pin voltage and driver regulator output on the open-drain PWRRDY pin. This feature can be used to enable a controllers output once the VCC voltage reaches the threshold and the regulator output is stable. This function ensures both FET drivers are off when the VCC voltage is below the voltage threshold.

SN74LVC2G17DCKR Features

      Since current flow in a Schottky rectifier is the result of majority carrier conduction, it is not subject to junction diode forward and reverse recovery transients due to minority carrier injection and stored charge. Satisfactory circuit analysis work may be performed by using a model consisting of an ideal diode in parallel with a variable capacitance. (See Figure 5)   Rectification efficiency measurements show that operation will be satisfactory up to several megahertz. For example, relative waveform rectification efficiency is approximately 70 percent at 2 MHz, e.g., the ratio of dc power to RMS power in the load is 0.28 at this frequency, whereas perfect rectification would yield 0.406 for sine wave inputs. However, in contrast to ordinary junction diodes, the loss in waveform efficiency is not indicative of power loss: it is simply a result of reverse current flow through the diode capacitance, which lowers the dc output voltage.

SN74LVC2G17DCKR Applicatioins

    Technical/Catalog InformationSN74LVC2G17DCKRVendorTexas Instruments (VA)CategoryIntegrated Circuits (ICs) Logic Type
Request For Quotation
Your Name *:
We will not use your email for any purpose other than to communicate with you about the information regarding Baitron related activity,we will not provide your email to any third party.
Company Name *:
Country *:
Tel *:
Email *:
Part Number *:
Quantity *:
Comment :
If you're looking for other components,please enter part number,quantity in the comment box,we will find it for you,even if it didn't show in our inventory database

Relate Parts

Part Number
Quantity
Manufacturer
Date Code
Description
Pricing
9427
08+
S3901/S3904 series do not require any DC voltage
15092
11+
The SAB 80C515/80C535 is a stand-alone, high-perfo
3415
11+
Clock output traces should use series termination
16895
DETAILED FEATURES High Definition Programmable F
14438
VH.A (Pin 4): Hysteresis Adjust. Hysteresis thresh
8675
Xtal/clock operation Operation of any MX-COM IC