STP10NK60ZFP DataSheet
DATASHEET
STP10NK60ZFP Description
ADVANCE INFORMATION NOTE This product is in development phase and specifications are subject to change without notice. Gennum reserves the right to remove the product at any time. Listing the product does not constitute an offer for sale.
STP10NK60ZFP Features
This is the collector of the power section of the STP10NK60ZFP. The output load current is supplied through this pin. For the device to regulate, the voltage at this pin must be between 0.1V and 0.8V greater than the output voltage (Higher output current require higher voltages differences between VPWR and OUTPUT).
STP10NK60ZFP Applicatioins
body model)..2000V ESD Protection (other pins, human body model)..2000V Continuous Power Dissipation (T A = +70C) ..SOP (derate 8.30mW/C above +70C)......667mW Operating Temperature Range-20C to +120C Junction Temperature...+150C Storage temperature Range.-65C to +165C Lead Temperature (soldering, 10sec).....+300C
Relate Parts
Part Number
Quantity
Manufacturer
Date Code
Description
Pricing
9427
08+
S3901/S3904 series do not require any DC voltage
15092
11+
The SAB 80C515/80C535 is a stand-alone, high-perfo
3415
11+
Clock output traces should use series termination
3808
11+
Noise on the transmission media is rejected by th
9113
11+
Vth can be expressed as voltage between gat
14031
Caution: This component is susceptible to damage f
3779
All channels are clamped during sync to establish
10528
The constant-frequency, current-mode PWM architect
5839
1. Stresses greater than those listed under "
13037
Electrostatic discharge can cause damage ranging