HOME >> ICs & Semiconductors >> Memory - XCF01SVOG20C
XCF01SVOG20C

XCF01SVOG20C

Manufacturer Part:XCF01SVOG20C
Part Type:Memory
Manufacturer:XILINX
Part ID:XCF01SVOG20C
Date Code:
Quantity Available:11466
Last Updated:2024/11/26

Fast Responses,Multi-lingual Sales Staff

*Global work hours:24 hours a day,5 days a week.
*Detailed part quote in less than 24 hours.
*Free Product Substitution Service

Description

Features

Applications

XCF01SVOG20C Description

    High Power Switching Regulator Controller for DDR Memory Termination VOUT Tracks 1/2 of VIN or External VREF No Current Sense Resistor Required Low Input Supply Voltage Range: 3V to 8V Maximum Duty Cycle > 91% Over Temperature Drives All N-Channel External MOSFETs High Efficiency: Over 95% Possible Programmable Fixed Frequency Operation:   100kHz to 500kHz External Clock Synchronization Operation Programmable Soft-Start Low Shutdown Current: <10µA Overtemperature Protection Available in 16-Pin Narrow SSOP Package

XCF01SVOG20C Features

    Hynix XCF01SVOG20C-H/L series incorporates SPD(serial presence detect). Serial presence detect function is imple- mented via a serial 2,048-bit EEPROM. The first 128 bytes of serial PD data are programmed by Hynix to identify DIMM type, capacity and other the information of DIMM and the last 128 bytes are available to the customer.

XCF01SVOG20C Applicatioins

      The XCF01SVOG20C is a fixed frequency, dual current/voltage mode, switching regulator that provides the control function for Cold Cathode Fluorescent Lighting (CCFL). This controller can be used to drive a single lamp, but is specifically designed for multiple lamp LCD panels. The IC can be configured as a master or slave and synchronize up to 12 controllers.   The XCF01SVOG20C includes highly integrated universal PWM or DC dim input that allows either a PWM or DC input to adjust brightness without requiring external conditioning, since a single external capacitor CPWM can be used to integrate a PWM input. Burst mode dimming is possible if the user supplies a low frequency PWM signal on the BRITE input and no CPWM capacitor is used. The controller utilizes Linfinitys patented direct drive fixed frequency topology and patented resonant lamp strike
Request For Quotation
Your Name *:
We will not use your email for any purpose other than to communicate with you about the information regarding Baitron related activity,we will not provide your email to any third party.
Company Name *:
Country *:
Tel *:
Email *:
Part Number *:
Quantity *:
Comment :
If you're looking for other components,please enter part number,quantity in the comment box,we will find it for you,even if it didn't show in our inventory database

Relate Parts

Part Number
Quantity
Manufacturer
Date Code
Description
Pricing
10241
11+
PARAMETER Reference Voltage Section Fb Voltage
13752
11+
  The floating-point register file is made u
17695
The CS5381 uses a 5th-order, multi-bit delta-sigma
10817
The internal circuit is composed of 2 stages inc
18287
The Edge646 driver supports three distinct program
19657
• True dual-ported memory cells which allow
6160
  These Schottky barrier diodes are designed
7530
These data selectors/multiplexers contain invert
11204
IOAPIC clock output. (14.318 MHz) Poweredby VDDL
7372
pin signalised an interrupt (logic 0). However, if
18994
The ispLSI 5000VE encompasses the innovative fea-
1200
11+
II, the maximum input current at maximum input vo
16274
Obsolete
Triacs 4.0 Amp 400 Volt
10790
Obsolete
Triacs 1.0 Amp 400 Volt
7810
Obsolete
Thermistors - PTC 265Vrms 10Ohms 0.2A Int 25% Tol
8265
Obsolete
Thermistors - PTC 420Vrms 600Ohms 0.021A Int 25% T
7186
Obsolete
Triacs REORD 519-L6004F31 TO-202 4A 600V TRIAC
7426
Drive Up To 15 LSTTL Loads Low Power Consumption,
3275
Continuous Drain Current, VGS @ 10V Continuous D
3499
The challenge for an integrated clock-recovery cir
8877
Output, Pin 14, is suitable for controlling a pow