HOME >> ICs & Semiconductors >> Programmable Logic ICs - XC9572XL-7TQG100C
XC9572XL-7TQG100C

XC9572XL-7TQG100C

Manufacturer Part:XC9572XL-7TQG100C
Part Type:Programmable Logic ICs
Manufacturer:XILINX
Part ID:XC9572XL-7TQG100C
Date Code:
Quantity Available:14842
Last Updated:2024/11/26

Fast Responses,Multi-lingual Sales Staff

*Global work hours:24 hours a day,5 days a week.
*Detailed part quote in less than 24 hours.
*Free Product Substitution Service

Description

Features

Applications

XC9572XL-7TQG100C Description

    drivers to drive either 3.3V or 2.5V output levels while the device logic and the output current drive is always pow- ered from 3.3V. The output drivers also provide individually programmable edge rates and open drain capability. A programmable pullup resistor is provided to tie off un- used inputs and a programmable bus-hold latch is available to hold tristate outputs in their last valid state until the bus is driven again by some device.

XC9572XL-7TQG100C Features

    dualoct received from the DQA/DQB data pins of the Channel to be loaded into the write buffer. There is also space in the write buffer for the BC bank address and C column address information. The data in the write buffer is automatically retired (written with optional bytemask) to one of the 64 dualocts of one of the sense amps during a subsequent COP command. A retire can take place during a RD, WR, or NOCOP to another device, or during a WR or NOCOP to the same device. The write buffer will not retire during a RD to the same device. The write buffer reduces the delay needed for the internal DQA/DQB data path turn-around.

XC9572XL-7TQG100C Applicatioins

    Mechanical Characteristics • Reel Options: MBR0530T1 = 3,000 per 7 reel/8 mm tape   Reel Options: MBR0530T3 = 10,000 per 13 reel/8 mm tape • Device Marking: B3 • Polarity Designator: Cathode Band • Weight: 11.7 mg (approximately) • Case: Epoxy, Molded • Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable • Lead and Mounting Surface Temperature for Soldering Purposes: 260C Max. for 10 Seconds
Request For Quotation
Your Name *:
We will not use your email for any purpose other than to communicate with you about the information regarding Baitron related activity,we will not provide your email to any third party.
Company Name *:
Country *:
Tel *:
Email *:
Part Number *:
Quantity *:
Comment :
If you're looking for other components,please enter part number,quantity in the comment box,we will find it for you,even if it didn't show in our inventory database

Relate Parts

Part Number
Quantity
Manufacturer
Date Code
Description
Pricing
10241
11+
PARAMETER Reference Voltage Section Fb Voltage
13752
11+
  The floating-point register file is made u
17695
The CS5381 uses a 5th-order, multi-bit delta-sigma
11466
High Power Switching Regulator Controller for DDR
10817
The internal circuit is composed of 2 stages inc
18287
The Edge646 driver supports three distinct program
19657
• True dual-ported memory cells which allow
6160
  These Schottky barrier diodes are designed
7530
These data selectors/multiplexers contain invert
11204
IOAPIC clock output. (14.318 MHz) Poweredby VDDL
7372
pin signalised an interrupt (logic 0). However, if
18994
The ispLSI 5000VE encompasses the innovative fea-
1200
11+
II, the maximum input current at maximum input vo
16274
Obsolete
Triacs 4.0 Amp 400 Volt
10790
Obsolete
Triacs 1.0 Amp 400 Volt
7810
Obsolete
Thermistors - PTC 265Vrms 10Ohms 0.2A Int 25% Tol
8265
Obsolete
Thermistors - PTC 420Vrms 600Ohms 0.021A Int 25% T
7372
pin signalised an interrupt (logic 0). However, if
14120
The API8208A eliminates the need of complicated c
6819
Leakage Current: Capacitors shall be stabilized at
10249
Built-in Schmitt trigger circuit High level out
8879
This document states the current technical specif