HOME >> ICs & Semiconductors >> Programmable Logic ICs - XC3S200AN-4FTG256C
XC3S200AN-4FTG256C

XC3S200AN-4FTG256C

Manufacturer Part:XC3S200AN-4FTG256C
Part Type:Programmable Logic ICs
Manufacturer:XILINX
Part ID:XC3S200AN-4FTG256C
Date Code:
Quantity Available:17963
Last Updated:2024/11/26

Fast Responses,Multi-lingual Sales Staff

*Global work hours:24 hours a day,5 days a week.
*Detailed part quote in less than 24 hours.
*Free Product Substitution Service

Description

Features

Applications

XC3S200AN-4FTG256C Description

    The MAX104 features an on-board +2.5V precision bandgap reference, which can be activated by connecting the bandgap reference´s output contact (REFOUT) to the in-phase input (REFIN) of the internal reference amplifier. The negative input of this amplifier is internally tied to the reference ground (GNDR). The REFOUT port can provide a current of up to 2.5mA for external devices. This is enough drive for two MAX104s configured for interleaved operation (to achieve a sampling rate of 2 gigasamples per second, or 2Gsps). Since the bandgap reference source is internally compensated, external bypass components are not needed with REFOUT connections.

XC3S200AN-4FTG256C Features

    • Single-Supply Operation (+2V to +6V) • Rail-to-Rail Analog Signal Dynamic Range • Low On-Resistance (6Ω typ. with 5V supply)   Minimizes Distortion and Error Voltages • On-Resistance Flatness, 3Ω typ. • Low Charge Injection Reduces Glitch Errors. Q = 4pC typ. • High Speed. tON = 10ns typ. • Wide -3dB Bandwidth: 326 MHz (typ.) • High-Current Channel Capability: >100mA • TTL/CMOS Logic Compatible • Low Power Consumption (0.5µW typ) • Small outline transistor package minimizes board area • Packaging (Pb-free & Green available):   - 5-pin 65-mil wide SOT23 (T) for XC3S200AN-4FTG256C and XC3S200AN-4FTG256C   - 6-pin 65-mil wide SOT23 (T) for XC3S200AN-4FTG256C   - 5-pin 50-mil wide SC70 (C) for XC3S200AN-4FTG256C/XC3S200AN-4FTG256C

XC3S200AN-4FTG256C Applicatioins

    The internal ADC treats Cs as a floating transfer capacitor; as a direct result, the sense electrode can be connected to either SNS1 or SNS2 with no performance difference. In both cases the rule Cs >> Cx must be observed for proper operation. The polarity of the charge buildup across Cs during a burst is the same in either case.
Request For Quotation
Your Name *:
We will not use your email for any purpose other than to communicate with you about the information regarding Baitron related activity,we will not provide your email to any third party.
Company Name *:
Country *:
Tel *:
Email *:
Part Number *:
Quantity *:
Comment :
If you're looking for other components,please enter part number,quantity in the comment box,we will find it for you,even if it didn't show in our inventory database

Relate Parts

Part Number
Quantity
Manufacturer
Date Code
Description
Pricing
10241
11+
PARAMETER Reference Voltage Section Fb Voltage
13752
11+
  The floating-point register file is made u
5208
A high on the MASTER RESET (MR) sets all the cont
14048
Addresses and chip enables are registered at risin
16717
The XC5200 Field-Programmable Gate Array Family i
17695
The CS5381 uses a 5th-order, multi-bit delta-sigma
8886
The mounting area was reduced by mak- ing the tw
13759
The A-to-B enable (CEAB) input must be low in ord
8877
Output, Pin 14, is suitable for controlling a pow
3499
The challenge for an integrated clock-recovery cir
3275
Continuous Drain Current, VGS @ 10V Continuous D
7426
Drive Up To 15 LSTTL Loads Low Power Consumption,
11466
High Power Switching Regulator Controller for DDR
10817
The internal circuit is composed of 2 stages inc
18287
The Edge646 driver supports three distinct program
19657
• True dual-ported memory cells which allow
16545
Output Bit Driver Voltage Supply Ground Output
9861
enabled and synchronous loading occurs on the ne
14077
There are recommended techniques such as grooves
12491
8. Guaranteed by Design. 9. This parameter is g
12050
2. Data labelled Typ is not to be used for design