HOME >> ICs & Semiconductors >> Programmable Logic ICs - xc3s500e-4pqg208c
xc3s500e-4pqg208c

xc3s500e-4pqg208c

Manufacturer Part:xc3s500e-4pqg208c
Part Type:Programmable Logic ICs
Manufacturer:XILINX
Part ID:xc3s500e-4pqg208c
Date Code:
Quantity Available:17212
Last Updated:2024/11/26

Fast Responses,Multi-lingual Sales Staff

*Global work hours:24 hours a day,5 days a week.
*Detailed part quote in less than 24 hours.
*Free Product Substitution Service

Description

Features

Applications

xc3s500e-4pqg208c Description

    The AC16543 are 16-bit registered transceivers that contain two sets of D-type latches for temporary storage of data flowing in either direction.They can be used as two 8-bit transceivers or one 16-bit transceiver. Separate latch-enable (LEAB or LEBA) and output-enable (OEAB or OEBA) inputs are provided for each register to permit independent control in either direction of data flow.

xc3s500e-4pqg208c Features

    The LPS input is considered inactive if it remains low for more than the LPS_RESET time (see the LPS terminal definition) and is considered active otherwise. When the XC3S500E-4PQG208C detects that the LPS input is inactive, the PHY-LLC interface is placed into a low-power reset state in which the CTL and D outputs are held in the logic 0 state and the LREQ input is ignored; however, the PCLK output remains active. If the LPS input remains low for more than the LPS_DISABLE time (see the LPS terminal definition), then the PHY-LLC interface is put into a low-power disabled state in which the PCLK output is also held inactive. The XC3S500E-4PQG208C continues the necessary repeater functions required for normal network operation regardless of the state of the PHY-LLC interface. When the interface is in the reset or disabled state and the LPS input is again observed active, the PHY initializes the interface and returns to normal operation. The PHY-LLC interface is also held in the disabled state during hardware reset. When the LPS terminal is returned to an active state after being sensed as having entered the LPS_DISABLE time, the XC3S500E-4PQG208C issues a bus reset. This broadcasts the node self-ID packet, which contains the updated L bit state (the PHY LLC now being accessible).

xc3s500e-4pqg208c Applicatioins

    Besides the USB interface, the XC3S500E-4PQG208C contains a WEP/TKIP engine block, an AES engine block, a MAC Support Unit (MSU), a 802.11b baseband controller, two memory controllers and the ARM® subsystem consisting of an Interrupt Controller, two 32-bit timers, and an address decoder unit.
Request For Quotation
Your Name *:
We will not use your email for any purpose other than to communicate with you about the information regarding Baitron related activity,we will not provide your email to any third party.
Company Name *:
Country *:
Tel *:
Email *:
Part Number *:
Quantity *:
Comment :
If you're looking for other components,please enter part number,quantity in the comment box,we will find it for you,even if it didn't show in our inventory database

Relate Parts

Part Number
Quantity
Manufacturer
Date Code
Description
Pricing
10241
11+
PARAMETER Reference Voltage Section Fb Voltage
13752
11+
  The floating-point register file is made u
5208
A high on the MASTER RESET (MR) sets all the cont
14048
Addresses and chip enables are registered at risin
16717
The XC5200 Field-Programmable Gate Array Family i
17695
The CS5381 uses a 5th-order, multi-bit delta-sigma
8886
The mounting area was reduced by mak- ing the tw
13759
The A-to-B enable (CEAB) input must be low in ord
3499
The challenge for an integrated clock-recovery cir
3275
Continuous Drain Current, VGS @ 10V Continuous D
7426
Drive Up To 15 LSTTL Loads Low Power Consumption,
11466
High Power Switching Regulator Controller for DDR
10817
The internal circuit is composed of 2 stages inc
18287
The Edge646 driver supports three distinct program
19657
• True dual-ported memory cells which allow
6160
  These Schottky barrier diodes are designed
14006
Byte Write Following the start signal from the ma
3755
Before the A/D digitizing the voice-band analog s
10503
In addition, the PCI interface can either be used
9133
RF Micro Devices believes the furnished informati
4981
In more severe ambient conditions, the package/ju